Ductile Iron Backup Ring
Back-up Ring, also named Convoluted Flanges for adapter. Material: ductile iron A536 60-45-12 or CF8M. Suite for IPS adapter. Surface: Red prime paint/Epoxy Coating/E-coating/Hot dippted galvanized.
Read article
Elbow-Malleable Iron Fittings
Malleable iron pipe fittings, 90 degree elbows, Pipe Fittings Material: malleable iron 300-6. Pipe Fittings Surface: Black or hot dipped (white) or electric galvanization. Forms of reinforcements: Bend or band malleable iron fittings. Pipe Fittings Range: 1/4″-4″ All fittings will be tested by 0. 5 MPa pneumatic pressures.
Cast Iron Soil Pipe EN877
Din En 877 or BS EN 877 Cast Grey Iron Pipes and Fittings. All grey iron Pipes produced by centrifuagal technology are mainly used in drainpipe systems through a flexible linkage. All pipes confirm to the standard of EN877, ASTM A888, ISO6594 and DIN19522.
Curabitur cursus condimentum ex non aliquam
Mauris eu faucibus diam. Morbi aliquam faucibus nulla sed consequat. In hac habitasse platea dictumst. Sed tristique felis eu massa dignissim placerat.
Cras ultricies molestie elit ac placerat
Duis mauris diam, varius in elit vitae, interdum vulputate sapien. Integer accumsan aliquet nunc, non mollis massa pulvinar tincidunt. Aliquam sed suscipit nisl, et placerat lacus. Aliquam et cursus sem.
The impact of lorem ipsum in 2016
Nulla at semper nisl, at eleifend elit. Maecenas suscipit lacus nec turpis facilisis auctor. Cras in placerat elit. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Aenean eu sapien felis.
10 Reasons for mollis massa pulvinar tincidun
Pharetra dui risus, sed elementum urna facilisis eu. Vestibulum vulputate metus malesuada, consequat justo ac, commodo felis. Aliquam non maximus leo, ut sollicitudin velit. Duis sed odio ac diam viverra condimentum.
Aenean hendrerit – ante sed turpis interdum consequat
Etiam varius, lacus nec tempor eleifend, ex justo lacinia diam, sit amet aliquet quam enim a leo. Etiam tristique metus eget ligula aliquam, eu pretium orci sollicitudin. Morbi consectetur orci ac augue vulputate porta.
IPS Bolt Rings
Also named ductile iron convoluted flange or back up ring. IPS bolt ring is designed for HDPE flange adapters. Mateiral: ductile iron A536 65-45-12 or ASTM A351 CF8M( SS316). Surface Finish optional for ductile iron Bolt Rings: Red prime paint/Epoxy Coating/E-coating/Glavernizaiton. Designed per ASME/ANSI B16.5, B16.47 ser. A CL150, B16.1 CL125, AWWA C207 B/D/E.
IPS Back Up Ring
Back-up Ring, also named Convoluted Flanges for IPS adapter. Material: ductile iron A536 60-45-12 or CF8M. DR7 with pressure 275psi. Surface for ductile iron ring: Red prime paint/Epoxy Coating/E-coating/Hot dippted galvanized.
IPS Backup Flanges
Backing flange Type: SE (Stub End) and AFR (Angle face ring) Material: ductile iron A536 60-45-12 or carton steel Surface: Red prime paint/Epoxy Coating/E-coating/Hot dippted galvanized. Flange Size: 1/2″-36″.
90 Socket Spigot Bends
90 Bends, socket spigot type , ductile iron pipe fittings per ISO2531 /EN545 standard. Pipe Wall thickness: K12 for Non-branched fittings; Method: Lost Form casting with 100% hydraulic pressure testing Pipe Coating: High alumina cement mortar lining finish internally and a bitumen coating externally; Or internal and external epoxy coating with blue PPA571 Plascoat.
45 Double Socket Bends
45 degree Bends, double socket type , ductile iron pipe fittings per ISO2531 /EN545 standard. Pipe Wall thickness: K12 for Non-branched fittings; Method: Lost Form casting with 100% hydraulic pressure testing Pipe Coating: High alumina cement mortar lining finish internally and a bitumen coating externally; Or internal and external epoxy coating with blue PPA571 Plascoat.
45 Socket Spigot Bends
45 degree Bends, socket Spigot type , ductile iron pipe fittings per ISO2531 /EN545 standard. Pipe Wall thickness: K12 for Non-branched fittings; Method: Lost Form casting with 100% hydraulic pressure testing Pipe Coating: High alumina cement mortar lining finish internally and a bitumen coating externally; Or internal and external epoxy coating with blue PPA571 Plascoat.
22.5 Double Socket Bends
22.5 degree Bends, double socket type , ductile iron pipe fittings per ISO2531 /EN545 standard. Pipe Wall thickness: K12 for Non-branched fittings; Method: Lost Form casting with 100% hydraulic pressure testing Pipe Coating: High alumina cement mortar lining finish internally and a bitumen coating externally; Or internal and external epoxy coating with blue PPA571 Plascoat.
22.5 Socket Spigot Bends
22.5 degree Bends, socket spigot type , ductile iron pipe fittings per ISO2531 /EN545 standard. Pipe Wall thickness: K12 for Non-branched fittings; Method: Lost Form casting with 100% hydraulic pressure testing Pipe Coating: High alumina cement mortar lining finish internally and a bitumen coating externally; Or internal and external epoxy coating with blue PPA571 Plascoat.
11.25 Socket Spigot Bends
11.25 degree Bends, socket spigot type , ductile iron pipe fittings per ISO2531 /EN545 standard. Pipe Wall thickness: K12 for Non-branched fittings; Method: Lost Form casting with 100% hydraulic pressure testing Pipe Coating: High alumina cement mortar lining finish internally and a bitumen coating externally; Or internal and external epoxy coating with blue PPA571 Plascoat.
11.25 Double Socket Bends
11.25 degree Bends, double socket type , ductile iron pipe fittings per ISO2531 /EN545 standard. Pipe Wall thickness: K12 for Non-branched fittings; Method: Lost Form casting with 100% hydraulic pressure testing Pipe Coating: High alumina cement mortar lining finish internally and a bitumen coating externally;
All Socket Tees
Ductile iron pipe fittings per ISO2531 /EN545 standard, All Socket Tees. Pipe Wall thickness: K14 for branched fittings; Method: Lost Form casting with 100% hydraulic pressure testing Pipe Coating: High alumina cement mortar lining finish internally and a bitumen coating externally; Or internal and external epoxy coating with blue PPA571 Plascoat.
Socket Spigot Tee with Flanged Branch
Ductile iron pipe fittings per ISO2531 /EN545 standard, Socket Spigot Tees with Flanged Pipe Wall thickness: K14 for branched fittings; Method: Lost Form casting with 100% hydraulic pressure testing Pipe Coating: High alumina cement mortar lining finish internally and a bitumen coating
Tees-ASME B16.9 Fittings
Butt welding Pipe Fittings, Straight Tees. Pipe Fittings Material: Carbon steel, stainless steel or alloy steel. Pipe Fittings Standard: ASME B16.9 factory made wrought butt-welding fittings Pipe Fittings Size: from DN 15-DN1200 (1/2″-48″) Pipe Fittings Coating: Black prime paint, oiled or hot dipped galvanized. Pipe Fittings with bevel ends.
Double Socket Tee with Flanged Branch
Ductile iron pipe fittings per ISO2531 /EN545 standard, Double Socket Tees with Flanged Branch Pipe Wall thickness: K14 for branched fittings; Method: Lost Form casting with 100% hydraulic pressure testing Pipe Coating: High alumina cement mortar lining finish internally and a bitumen coating
Socket Spigot Tee with Socket Branch
Ductile iron pipe fittings per ISO2531 /EN545 standard, Socket Spigot Tees with Socket Branch Pipe Wall thickness: K14 for branched fittings; Method: Lost Form casting with 100% hydraulic pressure testing Pipe Coating: High alumina cement mortar lining finish internally and a bitumen
330 Union-Malleable Iron Fittings
Malleable iron pipe fittings, 330 union, flat seat with teflon gasket Pipe Fittings Material: malleable iron 300-6. Pipe Fittings Surface: Black or hot dipped (white) or electric galvanization. Pipe Fittings Range: 1/4″-4″ All fittings will be tested by 0. 5 MPa pneumatic pressures in Chinese factory.
90 Double Socket Bends
Double Socket Bends, 90 degree , ductile iron pipe fittings per ISO2531 /EN545 standard. Pipe Wall thickness: K12 for Non-branched fittings; Method: Lost Form casting with 100% hydraulic pressure testing Pipe Coating: High alumina cement mortar lining finish internally and a bitumen coating externally; Or internal and external epoxy coating with blue PPA571 Plascoat.
Ductile Iron Collars
Collars, ductile iron pipe fittings per ISO2531 /EN545 standard. Pipe Wall thickness: K12 for Non-branched fittings; K14 for Branched fittings Pipe Coating: High alumina cement mortar lining finish internally and a bitumen coating externally; Or internal and external epoxy coating with blue PPA571 Plascoat.
Ductile Iron Flanged Spigots
Flagned Spigots, ductile iron pipe fittings per ISO2531 /EN545 standard. Pipe Wall thickness: K12 for Non-branched fittings; K14 for Branched fittings Pipe Coating: High alumina cement mortar lining finish internally and a bitumen coating externally; Or internal and external epoxy coating with blue PPA571 Plascoat.
Ductile Iron Flanged Sockets
Flanged Socket, ducti iron pipe fittings per ISO2531 /EN545 standard. Pipe Wall thickness: K12 for Non-branched fittings; K14 for Branched fittings Pipe Coating: High alumina cement mortar lining finish internally and a bitumen coating externally; Or internal and external epoxy coating with blue PPA571 Plascoat.
Materials Characteristics for Ductile Iron Pipe & Fittings
Materials Characteristics for Ductile Iron Pipe & Fittings, include tensile strength, yield strength and elongation, hardness
Ductile Iron Pipe & Fittings Technical requirements
Ductile Iron Pipe & Fittings Technical requirements, include joints and interconnection type,standard wall thickness and marking.
Concentric Reducers-ASME B16.9 Fittings
Butt welding Pipe Fittings, Concentric Reducers. Pipe Fittings Material: Carbon steel, stainless steel or alloy steel. Pipe Fittings Standard: ASME B16.9 factory made wrought butt-welding fittings Pipe Fittings Size: from DN 15-DN1200 (1/2″-48″);
Reducing Tees-ASME B16.9 Fittings
Butt welding Pipe Fittings, Reducing Outlet Tees. Pipe Fittings Material: Carbon steel, stainless steel or alloy steel. Pipe Fittings Standard: ASME B16.9 factory made wrought butt-welding fittings Manufactured from Seamless or welded pipes. Pipe Fittings Size: from DN 15-DN1200 (1/2″-48″).
340 Union-Malleable Iron Fittings
Malleable iron pipe fittings, 340 Unions female & female, conical joint seat Pipe Fittings Material: malleable iron 300-6. Pipe Fittings Surface: Black or hot dipped (white) or electric galvanization. Pipe Fittings Range: 1/4″-4″ All fittings will be tested by 0. 5 MPa pneumatic pressures in Chinese factory.
O’let-Forged Fittings
NPT threaded type or Butt-welding type or Socket welding type. Forged steel Outlets conform to MSS SP 97-2006 Forged Fittings Material: Carbon steel to ASTM A105/SA105N and NACE MR-01-75; Stainless steel to ASTM A182 F304, F304L, F316 and F316L. Connect types: Socket-Welding / Thread (Screwed NPT/BSPT/ ISO7-1).
Tee-Forged Fittings
High Pressure Pipe Fittings Forged Pipe Fittings. Forged Fittings Type: Forged Steel Tees, Forged Fittings Material: Carbon steel to ASTM A105/SA105N and NACE MR-01-75; Stainless steel to ASTM A182 F304, F304L, F316 and F316L. Forged Fittings Standard: ASTM/ASME B16.11; MSS SP 79; MSS SP 83; MSS SP95; MSS SP 97 and BS3799.
45 Elbow-Forged Fittings
High Pressure Pipe Fittings Forged Pipe Fittings. Forged Fittings Type: Forged 45 Elbow, Forged Fittings Material: Carbon steel to ASTM A105/SA105N and NACE MR-01-75; Stainless steel to ASTM A182 F304, F304L, F316 and F316L. Forged Fittings Standard: ASTM/ASME B16.11; MSS SP 79; MSS SP 83; MSS SP95; MSS SP 97 and BS3799.
Crosses-ASME B16.9 Fittings
Butt welding Pipe Fittings, Straight Crosses and Reducing Oulet Crosses Pipe Fittings Material: Carbon steel, stainless steel or alloy steel. Pipe Fittings Standard: ASME B16.9 factory made wrought butt-welding fittings Manufactured from Seamless or welded pipes. Pipe Fittings Size: from DN 15-DN1200 (1/2″-48″);
342 Union-Malleable Iron Fittings
Malleable iron pipe fittings, 342 Unions female & female, conical joint brass seat Pipe Fittings Material: malleable iron 300-6. Pipe Fittings Surface: Black or hot dipped (white) or electric galvanization. Pipe Fittings Range: 1/4″-4″ All fittings will be tested by 0. 5 MPa pneumatic pressures in Chinese factory
Stub Ends-ASME B16.9 Fittings
Butt welding Pipe Fittings, Lap Joint Stub Ends. Pipe Fittings Material: Carbon steel, stainless steel or alloy steel. Pipe Fittings Standard: ASME B16.9 factory made wrought butt-welding fittings Pipe Fittings Size: From DN25-DN600(1″-24″) Pipe Fittings Surface: Black prime paint, oiled or hot dipped galvanized. Pipe Fittings with bevel ends original from China.
180 Elbows-ASME B16.9 Fittings
Butt welding Pipe Fittings, 180 degree returns (elbows), long radius and short radius. Pipe Fittings Material: Carbon steel, stainless steel or alloy steel. Pipe Fittings Standard: ASME B16.9 factory made wrought butt-welding fittings Manufactured from Seamless or welded pipes. Pipe Fittings Size: LR elbow from DN 15-DN600 (1/2″-24″);
Caps-ASME B16.9 Fittings
Butt welding Pipe Fittings, Caps. Pipe Fittings Material: Carbon steel, stainless steel or alloy steel. Pipe Fittings Standard: ASME B16.9 factory made wrought butt-welding fittings Manufactured from Seamless or welded pipes/steel plate. Pipe Fittings Size: from DN 15-DN1200 (1/2″-48″);
Eccentric Reducer-ASME B16.9 Fittings
Butt welding Pipe Fittings, Eccentric Reducer. Pipe Fittings Material: Carbon steel, stainless steel or alloy steel. Pipe Fittings Standard: ASME B16.9 factory made wrought butt-welding fittings Manufactured from Seamless or welded pipe. Pipe Fittings Size: LR elbow from DN 15-DN1200 (1/2″-48″); SR elbow from DN25-DN600(1″-24″)
45 Elbow-ASME B16.9 Fittings
Butt welding pipe fittings, 45 elbow, long radius and short radius. Pipe Fittings Material: Carbon steel, stainless steel or alloy steel. Pipe Fittings Standard: ASME B16.9 factory made wrought butt-welding fittings Manufactured from Seamless or welded pipe. Pipe Fittings size: LR elbow from DN 15-DN1200 (1/2″-48″); SR elbow from DN25-DN600(1″-24″)
Production process of Ductile Iron Pipes
Manufacturing process of ductile iron pipe: 1. Molten Iron Preparation. 2. Spheroidization 3. Core Making. 4.Centrifugal Casting
B16.5 Blind Steel Flanges
Stainless steel Blind flanges; Flange Standard: ANSI B16.5; Flange material: Stainless steel ASTM A182 F304/F316/F321 Other material: steel flanges ASTM A105; ASTM A350; ASTM A694;
B16.5 Slip On Steel Flanges
Stainless steel slip on flanges; Flange Standard: ANSI B16.5; Flange material: Stainless steel ASTM A182 F304/F316/F321 Other material: steel flanges ASTM A105; ASTM A350; ASTM A694;
Steel Outlets-Forged Fittings
Forged Pipe Fittings, High Pressure Pipe Fittings. NPT threaded type or Butt-welding type or Socket welding type. Forged Stainless Outlets conform to MSS SP 97-2006 Forged Fittings Material: Carbon steel to ASTM A105/SA105N and NACE MR-01-75; Stainless steel to ASTM A182 F304, F304L, F316 and F316L.
OS & Y Resilient Seat Gate Valve
DIN 3352 F4 Gate Valves, Rising Stem Resilient Soft Seated Grate Valves Cast Iron Valves Working Pressure: PN10/PN16 Flange drilled by DIN2532/2533/2501 Valve Size: DN50-DN300
Hex Nipple-Forged Fittings
High Pressure Pipe Fittings Forged Pipe Fittings. Forged Fittings Type: Forged Hexagon Nipple. Forged Fittings Material: Carbon steel to ASTM A105/SA105N and NACE MR-01-75; Stainless steel to ASTM A182 F304, F304L, F316 and F316L. Forged Fittings Standard: ASTM/ASME B16.11; MSS SP 79; MSS SP 83; MSS SP95; MSS SP 97 and BS3799.
Standard Finishes for Face of Flange ANSIB16.5
Based on MSS SP-6-2007 standard, we design and machine the ASTM flange contact finishes for steel flange of ANSI B6.5. Stock Finish: The most widely used of any gasket finish, because, practically, is suitable for all ordinary service conditions. This is a continuous spiral groove.
Union-Forged Pipe Fittings
High Pressure Pipe Fittings Forged Pipe Fittings. Forged Fittings Type: Forged Steel Union. Forged Fittings Material: Carbon steel to ASTM A105/SA105N and NACE MR-01-75; Stainless steel to ASTM A182 F304, F304L, F316 and F316L. Forged Fittings Standard: ASTM/ASME B16.11; MSS SP 79; MSS SP 83; MSS SP95; MSS SP 97 and BS3799.
Street Elbow-Malleable Iron Fitting
Street Elbow has a femal fitting on one side and a male pipe on the other end. Malleable iron pipe fittings, 92 street elbow, Pipe Fittings Material: malleable iron 300-6. Pipe Fittings Surface: Black or hot dipped (white) or electric galvanization. Forms of reinforcements: Bend or band malleable iron fittings. Pipe Fittings Range: 1/4″-4″
King Pipe Nipple
King Nipple is a Hose connector with one end male thread, it is made from zinc galvanized (plated) pipe. The thread is NPT as well as BSPT. Size from 1/2″(DN15) to 8″(DN200). You can choose welded steel pipe or seamless steel pipe.
T-Type Centrifugal Ductile Cast Iron Pipe
DN80-DN1200mm,ISO2531,BS En545,ISO4179,ISO8179,for water & gas transportation understand Ductile Iron Pipe Features: 1) The pipes are produced with good straightness, wall thickness, remarkable mechanical prosperities and firmly sticking internal and external coating layer
Ductile Iron Socket Taper
Ductile Iron Pipe Fittings, Socket Taper, ISO2531 standard. Blue Epoxy Coating. Size from DN100x80 to DN2000x1800 Type: Double socket taper, Socket-Spigot taper, Spigot-Socket Taper.
Butterfly Valves with Worm Gearbox
Wafer type Butterfly Valve, worm gearbox operation. Valve Body Material: Cast Iron GG20/GG40 Valve Disc Material: Ductile iron GG40 (nickel plated) or stainless steel. Valve Lever: Cast Iron Valve Size: From DN50-DN350
Sanitary Butterfly Valves
Sanitary manually operated butterfly valve for use in stainless steel pipe systems. The valve consists of two valve body halves, valve disc, bushes for the stem and seal ring. The valve is assembled by means of screws and nuts. The handle is fitted onto the valve by means of a cap/block system and screw.
DIN Y Type Strainer
Cast Iron Y type Strainer, DIN standard valve. Cast iron body. Strainer size from DN15-DN400, Nominal Pressure: PN10/16, Face to face: DIN3202/F1, Strainer body flange drilling: DIN2533,
DIN 2605 Butt-Welding Elbow
DIN 2605-1/2 butt welding pipe fittings – steel elbows/bends: 45 elbow/90 elbow/ 180 elbow; Steel Elbow type: 2D/3D/5D/10D/20D Material is carbon steel or stainless steel. Nominal size: DN10-DN1600
Steel Pipe Nipples
Welded or seamless steel pipe nipple, Carbon steel or stainless steel conduit pipe fittings. Thread confirm to NPT or BS21/iso7-1 Black ( self color)/ hot dipped/ Galvanized surface finish. Size to 4″ (DN200)
Ductile Iron Flanged Pipes
Flanged Pipe/Column, ductile iron material. Pipe Flange designed by BS4504/EN1092-2. Ductile iron pipe designed from ISO2531/EN545. Pipe Wall thickness: K8/K9/K10/K12. Centrifugal casting method or lost foam casting method( vacuum casting)
ASTM A888/CISPI301 Soil Pipe
Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications. ASTM A888/CISPI 301 standard. Cast Iron Soil Pipe Institute (CISPI) specification 301. EN877 or DIN19522/ISO6594 soil pipe also can be supplied.
ISO 6594 Cast Iron Drainage Pipe
Cast iron drainage pipes and fittings —Spigot series All grey iron Pipes produced by centrifugal technology are mainly used in drainpipe systems through a flexible linkage. All pipes confirm to the standard of EN877, ASTM A888, ISO6594 and DIN19522.
Socket-Malleable Iron Fitting
Malleable iron pipe fittings, 270 socket, Pipe Fittings Material: malleable iron 300-6. Pipe Fittings Surface: Black or hot dipped (white) or electric galvanization. Forms of reinforcements: Bend or band malleable iron fittings. Pipe Fittings Range: 1/4″-4″ All fittings will be tested by 0. 5 MPa pneumatic pressures in Chinese factory.
UNI 2280 Steel Flanges
Welding Neck Stainless Steel Flange, Flange Standard: UNI 2280 PN6 Flange manufactured through forging method or casting method. Flange Size from DN10 to DN2000. Flange material: Carbon steel as RST37-2 S235JRG2;
Single Pin Heavy-Duty Clamp
Product name: Heavy Duty Single Pin Clamp, include 2pcs of ferrule,1pc of gasket and 1pc of clamp Fitting End Connection: Clamped Fitting Material quality: 304, 316L Pipe Fitting Standard: SMS, DIN Pipe Fitting Material—SS304, SS316L
Ductile Iron Universal Coupling
Ductile Iron Universal Coupling also named flexble coupling/adapter or Extensive range flexible coupling Working pressure: PN 10 and PN 16 Coupling Connect Type: universal coupling short/ long, universal coupling stepped, universal coupling flanged. Outside Diameter: 47-500 mm (DN50-DN500)
B16.47 WN Steel Flange
Welding Neck Steel Flanges with Groove Face. Standard: ANSI B16.47; ANSI B16.5, Material: ASTM A105; ASTM A350; ASTM A694; ASTM A182 Face type: Flat Face; Raised Face; Ring Joint Face; Lap Joint Face; Large Male Female, Small Male Female,
Hex Nipple-Malleabl Iron Fittings
Malleable iron pipe fittings, 280 Hexagon Niples, Pipe Fittings Material: malleable iron 300-6. Pipe Fittings Surface: Black or hot dipped (white) or electric galvanization. Forms of reinforcements: Bend or band malleable iron fittings. Pipe Fittings Range: 1/4″-4″ All fittings will be tested by 0. 5 MPa pneumatic pressures in Chinese factory.
B7 Studs
A193 B7 Stud-A193 B7 Stud Manufacturers we are manufacturer for threaded rod/bar and product a complete range of specifications in plain; zinc; H.D.G; balck, also ASTM A-193-B7 stud Gread: G4.8, G8.8, the standard of our products is DIN, ANSI, GB and BSW, UNF,UNC
DIN Standard Check Valves
Swing type Check Valve with DIN standard. Valve Face to Face: DIN3202 F6; Valve Flange: DIN2532/DIN2532/DIN2533; Valve Working Pressure: PN6/PN10/PN16; Valve Hydraulic Testing: 100% based on DIN3230. Valve Working Temperature: 0~18 degree.
Carbon Steel ASTM A105
ASTM A105 is a popular carbon steel which widely used in flanges products. Principal Features: A 105 is an ASTM specification dealing with forged carbon steel piping components. The steel alloy involved is a low carbon, manganese and silicon containing steel similar to AISI 1330, but with lower manganese content.
DIN2576 Plate Flanges
PL Steel Flanges, Plate Steel Flanges, Flat Steel Flanges. Standard: DIN2576 Flanges for soldering or welding. Material: ST37.2, ASTM A105; ASTM A350; ASTM A694; ASTM A182. Face type: Form A or Form B.
Sanitary Tube
Sanitary Pipe/Tube, mirror polish; Design Standard: SMS/DS, ISO2037, IDF, DIN11850, BS4825 and ASME BPE; Tube Size: from 3/8″ to 6.25″; DN8-DN160 Pipe Material: TP304/TP316; Seamless pipe or welded pipe.
90 Elbow-Forged Fitting
High Pressure Pipe Fittings Forged Pipe Fittings. Forged Fittings Type: Forged 90 Elbow. Forged Fittings Material: Carbon steel to ASTM A105/SA105N and NACE MR-01-75; Stainless steel to ASTM A182 F304, F304L, F316 and F316L. Forged Fittings Standard: ASTM/ASME B16.11; MSS SP 79; MSS SP 83; MSS SP95; MSS SP 97 and BS3799.
Cast Iron Y Strainer
Y type Strainer, Cast iron body. Strainer size from DN25-DN300, Nominal Pressure: PN10/16, Face to face: DIN3202/F1, Strainer body flange drilling: DIN2533, Valve Inspection: DIN3230, Valve design standard: DIN3352
Stainless Steel Buttwelding Elbow
Buttwelding Pipe Fittings, Pipefitting Standard: ANSI B16.9 Pipefitting material: Stainless steel ASTM A403 WP304/304L. Pipefitting type: 90 Elbow. Pipefitting size: 1/2″-72″
Ductile Iron Fittings- 22.5 Elbow
Ductile Iron Pipe Fittings- 22.5 Elbow Method: Lost Foam Casting, Sand Casting Standard: ISO2531, EN545 Type: 22.5 flange elbow. Coating: Epoxy coating or zinc rich paint coating, or bituminous paint.
Stainless Steel Quick Coupling
Quick Coupling, easy assemble to pipeline systems. Investment castings method, pipe fittings, Stainless steel ASTM A351 CF8 /304, CF8M/316, CF3/304L, CF3M/316L, ss321. CNC machining. Other Stainless Steel pipe fittings casting, such as stainless steel elbow, stainless steel tee, union, socket and stainless steel coupling.
Tee-Malleable Iron Fittings
Malleable iron pipe fittings, Tees, Pipe Fittings Material: malleable iron 300-6. Pipe Fittings Surface: Black or hot dipped (white) or electric galvanization. Forms of reinforcements: Bend or band malleable iron fittings. Pipe Fittings Range: 1/4″-4″ All fittings will be tested by 0. 5 MPa pneumatic pressures.
Carbon Steel Seamless Pipe/Tube
Seamless Pipes and Tubes, Material: carbon steel ASTM A106, ASTM A53, API 5L. End: Plain end, Beveled end, Threaded end, Package: Bare, in Bundles. All our steel pipes as following: Type: Seamless, ERW, SSAW, LSAW
Chinese Ductile Iron Pipes
Ductile Iron Pipe Features: 1) The pipes are produced with good straightness, wall thickness, remarkable mechanical prosperities and firmly sticking internal and external coating layer 2) Flexible push-in joint and rubber gasket are used resulting in convenient installation of pipelines 3) The pipes are produced by standard ISO2531 and EN 545
Wafer Type Butterfly Valve
Lever Wafer Butterfly Valve Valve Body Material: Cast Iron GG20/GG40 Valve Disc Material: Ductile iron GG40 (nickel plated) or stainless steel. Valve Lever: Cast Iron Valve Size: From DN50-DN350
B16.5 Threaded Flanges
Threaded Steel Flanges, Standard: ANSI B16.5, Material: ASTM A105; ASTM A350; ASTM A694; ASTM A182 Threaded Stainless Steel Flanges
B16.5 WN steel flange
Welding Neck Steel Flanges, Standard: ANSI B16.5, Material: ASTM A105; ASTM A350; ASTM A694; ASTM A182 Face type: Flat Face; Raised Face; Ring Joint Face; Lap Joint Face; Large Male Female, Small Male Female,